GMC Envoy & Chevy Trailblazer Fuel Door Spring - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 100%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

GMC Envoy & Chevy Trailblazer Fuel Door Spring

0 downloads280 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Drove me nuts you can't buy just the spring from a Envoy/Trailblazer gas door. Made one myself. Install as shown, smaller end hook must be installed on the bracket side, not the door side, or it will bind up. Print solid as nothing but perimeters, standing on edge, out of PETG or ABS/ASA. PEEK and Nylon might work too.