Files (7)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| VW_MK4_Golf_GTI_Grill_Badge_-_Mount_Slide_Lock.stl | Mount / bracket | 2.8 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| VW_MK4_Golf_GTI_Grill_Badge_-_Rabbit_Edition_Mount_Right.stl | Choose right variant | 476.6 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| VW_MK4_Golf_GTI_Grill_Badge_-_Basic_Edition_Mount_Right.stl | Choose right variant | 264.1 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| VW_MK4_Golf_GTI_Grill_Badge_-_Basic_Edition_Mount_Left.stl | Choose left variant | 264.1 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| VW_MK4_Golf_GTI_Grill_Badge_-_Basic_Edition_No_Inset.stl | Printable file | 163.9 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in slicer for optimal print quality and minimal supports |
| VW_MK4_Golf_GTI_Grill_Badge_-_Basic_Edition_Curved_Inset.stl | Printable file | 254.0 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in slicer for optimal print quality and minimal supports |
| VW_MK4_Golf_GTI_Grill_Badge_-_Rabbit_Edition_Flat_Inset.stl | Printable file | 144.0 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in slicer for optimal print quality and minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Grill Badge Emblem for Volkswagen MKIV Golf
Shared by
Michael ChenDescription
I was having trouble finding this grill emblem for my GTI, so I recreated it myself. Print the badge mount and stick a replacement hatch emblem to it. Knockoff emblems can be found on Amazon, eBay, or Aliexpress for around $10. You can also pull a hatch emblem from the parts yard. This model conveniently uses the same OEM mounting points. It's also beefier, more secure, and optimized for 3D printing. Attach the optional slide lock and slide to towards the front after installation to prevent unwanted removal. Depress the center to release the lock. If you can't procure a replacement hatch emblem for a reasonable price, you can print one of the included models, then sand and paint to your liking. The flat inset version can be printed with a layer change for a two tone effect. Vinyl decals also work well to fill the inset versions (You can find pre-cut vinyl at Badgeskins). Volkswagen part numbers for reference:.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
