Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

GS Oil cap tool for BMW vehicle

0 downloads75 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a tool to open the strange cap on a 2011 BMW R1200 GS and similar models. It also has a 10mm hex cut out to be able to adjust the wind screen bolts. Voids have been made to be able to install 8mm magnets if desired. This tool is much smaller than the one that comes with the bike's tool kit, and works with the bike's key. I keep mine on the windscreen bolt as pictured. I made this with a Rostock Max using ABS.