Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 60% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hand Support for Lancia Ypsilon 2003
Shared by
3DPrintedCarPartDescription
I designed this handler for the car of my wife when we bought it second hand because it didn't have the one at the copilot's seat. It is suitable to install it with the appropiate screws (right now I do not remember which ones I used) according to the threaded monting holes you should find at the place of the handler. The holes have 7mm of diameter at the bottom to hold the piece against the frame of the car and 12 mm diameter at the top to allow you to pass the screw until the bottom and allocate its head. I didn't have any issue to install it, but may be you should set the infill higher than 60% to incrrease the strength of the part. I hope this is useful for somebody else.
Compatible Cars
Originally published on thingiverse.com by José Alfonso Vivo (Wudrup) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
