HID-9006 Adapter//H11-9005&9006//9005&9006-H1 - image

Files (3)

H11-9005v1.1.stl

STL

539.8 KB

H1.stl

STL

502.3 KB

D2S.stl

STL

1.0 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
H11-9005v1.1.stl	Printable file	539.8 KB STL	14g $0.34	15g $0.37	34g $0.81	Ensure a nice solid press-fit by sanding/filing the inside diameter if necessary
H1.stl	Printable file	502.3 KB STL	14g $0.33	15g $0.36	33g $0.78	Ensure a nice solid press-fit by sanding/filing the inside diameter if necessary
D2S.stl	Printable file	1.0 MB STL	18g $0.44	20g $0.47	43g $1.04	Ensure a nice solid press-fit by sanding/filing the inside diameter if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

HID-9006 Adapter//H11-9005&9006//9005&9006-H1

0 downloads193 views0 likes

Shared by

Michael Chen

Verified

Description

Installed on a 06 Acura TSX in the low beam (projector housing) and Fog Lights. all measurements and dimensions are based on a Standard Amazon Brand LED kit "FARHEN" Depending on your printer and configuration may have to sand/file the inside diameter. you want a nice solid press-fit. I used superglue after clocking to ensure they stayed on. Ran for 50+hrs with zero deformations. IDC what you do with the files sorry i wasnt able to convert to STEP will be uploading and updating to include high beam adapters too. Highly recommend PLA+/ PLACF/Nylon.