Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Holders for iPhone XS and 11 Max for CD slot in 2014 Ford Escape
Shared by
3DPrintedCarPartDescription
I tried a few different iPhone holder models for CD slots and liked the one by Accord56 the best as it sits snug in the CD slot, allows you to change the viewing angle, and you can replace the actual phone holder in case you get a phone with different dimensions. However, it didn’t fit my wife’s Ford Escape as the phone kept hitting the small logo underneath the CD slot. So I moved that wheel like part in the insert that connects to the phone to the left side of the insert and also cut away some of material on the bottom of the adapter. I also changed the actual phone adapter to accommodate an iPhone XS in a case. VERSION 2: I realized that the original design of the phone adapter didn't allow for a USB cable to be attached to the phone. In this new version, this is now possible. Also, I made the phone adapter a tad larger to have a bit more wiggle room for the phone. UPDATE: Added.stl for iPhone 11 Max case.
Compatible Cars
Originally published on thingiverse.com by Rainer Fuchs (fuchsr) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
