Files (1)

secondButtonTest.stl

STL

144.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 40%	100% solid	Recommendation
secondButtonTest.stl	Primary model	144.0 KB STL	Slice file	Slice file	Slice file	Print with the large flat side down, rotate STL 90 degrees if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Honda Civic Accessory plate

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A coworker wanted to add a toggle switch for his fog lights. He didn't want to just drill through his stock one. So I borrowed the original and modeled a replacement in Fusion 360. Print in PET-G or ABS for car use. PLA will melt. PET-G may get soft over the years, but will hold up better. This is currently untested, and will be checked in the next few days. use a thick layer height as the first layer is the only one you'll see when its installed and PET-G will bond better with thicker layers. You'll need supports for the flexible arms. Print orientation: face side down. rotate STL 90 degrees to have the large flat side down.