Files (3)

Honda_window_washer_reservoir_cup.STL

STL

295.9 KB

Honda_window_washer_reservoir_cup_strap.STL

STL

13.2 KB

Honda_window_washer_reservoir_cup_w_strap.STL

STL

201.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Honda_window_washer_reservoir_cup.STL	Printable file	295.9 KB STL	Slice file	Slice file	Slice file	Ensure the cap is oriented to minimize supports in your slicer.
Honda_window_washer_reservoir_cup_strap.STL	Accessory piece	13.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Honda_window_washer_reservoir_cup_w_strap.STL	Printable file	201.4 KB STL	Slice file	Slice file	Slice file	Ensure the cap is oriented to minimize supports in your slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Honda CR-V Washer Reservoir Cap

0 downloads55 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Somehow, I've lost a cap for my 2004 Honda CR-V windshield washer reservoir. Here is a replacement. Cap printed in PETG, strap in TPU. Strap is not necessarily needed, just use some string to tie the cap to the filling tube. Version with strap should be printed in TPU or similar for flexibility.