Files (2)

10001-000-STEP.stp

STP

102.1 KB

10001-000-STL.stl

STL

198.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
10001-000-STEP.stp	Printable file	102.1 KB STP	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
10001-000-STL.stl	Printable file	198.5 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Honda CRV Wiper Cap (2001)

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Hey everyone! I had a wiper reservoir that had a broken cap on a 2001 Honda CRV. I could not find a good design so I made my own. If you still have the dipstick, you can zip tie it to the end. I make lots of custom designs for prototypes, etc. Please see my Esty page and let me know if you have any questions. Thank you https://www.etsy.com/shop/FillerCustoms?ref=shop_sugg_market