Honda Engine Cover Stud 91501SS8A01 - image

Files (1)

HondaEngineCoverStud91501SS8A01.stl

STL

143.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
HondaEngineCoverStud91501SS8A01.stl	Cover / cap	143.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Honda Engine Cover Stud 91501SS8A01

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a lug that holds the engine cover on a Honda Odyssey 2008. Honda part number is 91501SS8A01. Measured off of original. The orange one is the printed and the black is the original. Plastic washer holds lug in place on the engine cover and can be obtained from hardware store. I printed in PLA, and it is holding up fine after 2 weeks on my wife's van.