Files (2)

Honda_Fuel_Release_Fix.stl

STL

142.3 KB

Honda_Gas_Piece_03.stl

STL

93.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Honda_Fuel_Release_Fix.stl	Printable file	142.3 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping
Honda_Gas_Piece_03.stl	Printable file	93.6 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Honda Fuel Release Fix

0 downloads56 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a simple fuel cable fix for a common Honda Civic problem. You can youtube or google the problem, and the fix. I didn't feel like spending $20, so I measured the cable clamp (or whatever) and made this piece. One is connected with screws, because I wanted a quick test and didn't want to spend a lot of time designing a clip or snap joint. This one is bulky and the trim piece wouldn't fit over it and could not close things back up. This makes me question the $20 option. It's about the same size. The other is thinner and suitable for zip-ties or wire. I used both. I got lazy but excited so no photos are posted. But I did install the latter and it works just great! It's still a bit bulky so I trimmed the trim piece back to fit over it. 16-year old car, I could't be bothered anymore.