Files (3)

honda_car_b.stl

STL

55.4 KB

honda_car_mmu.3mf

3MF

30.2 KB

honda_car_raised_for_colourchange.3mf

3MF

16.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
honda_car_b.stl	Printable file	55.4 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion
honda_car_mmu.3mf	Printable file	30.2 KB 3MF	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion
honda_car_raised_for_colourchange.3mf	Accessory piece	16.8 KB 3MF	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Honda Logo Centre for Aftermarket Hub Caps

0 downloads22 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a Honda Logo to stick onto a generic aftermarket hub cap. The 15 yr old Jazz/Fit needed new ones after the trials of being a Grandma car then a learner car x 2:) I have included 2 versions - a 2 colour MMU version which has a smooth top surface (3mf file which should align the 2 parts on the Prusa slicer ) - a raised logo version so you can do a "Z" level colour change (both a 3mf and stl).