Files (1)

Honda_Vintage_Emblem.stl

STL

940.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

30g

Based on 25% main infill across listed model files

Material cost

$0.71

Filament only at roughly $24/kg PETG / ASA

Print time

50m–1.4h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Honda_Vintage_Emblem.stl	Primary model	940.1 KB STL	27g $0.65	30g $0.71	65g $1.55	This emblem is likely for decorative or interior use, but if exposed to outdoor conditions, ensure the chosen material can withstand the elements.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Honda Vintage Emblem

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Honda Vintage Emblem - As seen on Honda S800. Reproduction design by me. It does not have the same dimension as the real parts. Hey people...if you like this please follow me!!!