Hyundai i20 2008 onward Sun Visor Clip Retainer - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Hyundai i20 2008 onward Sun Visor Clip Retainer

0 downloads56 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I was finding it difficult in sourcing a replacement Hyundai i20 2008 onward Sun Visor Clip/Retainer so thought I'd design one. For my first ever 3d design project for 3d printing it turned out really good. Straight of the printer the sun visor is held a little too tight but a small amount of sanding will sort that out. Software: Blender 2.7 Infill for strength 70%.