Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| autos-tolto-v3-5.stl | Primary model | 53.6 KB STL | Slice file | Slice file | Slice file | Ensure the model is oriented to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hyundai i20 BC3 Wireless Charger pad with Ikea Livboj
Shared by
3DPrintedCarPartDescription
My i20 was missing a wireless charger, so i designed this piece to fit below the AC controls. The 5 little circles are the feet you can glue on, so the total thickness will be 10mm. Optionally you can adjust the overall thickness to 10mm without the feets, i just did this to save material. In the cutout, an Ikea Livboj charger fits perfectly. You can order a short 90degree USB-A - USB-C cable from Aliexpress and you can plug in in into the charging port in your i20. I mounted it in my car with removable double sided tape. I also glued some felt on the right side, where i store my sunglasses.
Compatible Cars
Originally published on thingiverse.com by Péter Viszt (visztpeter) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
