Isuzu plugs for holesawed interior - image

Files (5)

Isuzu_hole_plug_2.stl

STL

638.0 KB

Isuzu_hole_plug_2b.stl

STL

653.6 KB

Isuzu_hole_plug_3.stl

STL

645.6 KB

Isuzu_hole_plug_3b.3mf

3MF

756.6 KB

Isuzu_hole_plug_3b.stl

STL

661.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Isuzu_hole_plug_2.stl	Printable file	638.0 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
Isuzu_hole_plug_2b.stl	Printable file	653.6 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
Isuzu_hole_plug_3.stl	Printable file	645.6 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
Isuzu_hole_plug_3b.3mf	Printable file	756.6 KB 3MF	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
Isuzu_hole_plug_3b.stl	Printable file	661.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Isuzu plugs for holesawed interior

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have an old Isuzu and a modification was made to the center console with a holesaw. Being unable to replace it, I decided to plug it and make it look like a feature instead of a band-aid. There are four variants: convex, concave and one of each with a lip at the bottom. They are intended to fill a 53.5mm hole, but can be resized to cover up your own misfortunes. The 2D outline of the Isuzu lettering was taken from "Isuzu 2012 - 2019 badge" by 3DPrintsBy_Chris. The rest is my own sloppy work.