Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Bumper plugs
Shared by
3DPrintedCarPartDescription
I made one in PETG, sanded and painted then, ABS... for the win! With a dome top sanding and acetone make a smooth finish. The original plugs (and bumper) says Steel Horse Automotive 73mm or 2-13/16" ID for bumper in my case, scale as necessary. The ones "with support" have a disposable inner circle and brims to keep ABS from warping. But you can use that with you favorite material also.
Compatible Cars
Originally published on thingiverse.com by TIMOTHY WILLIAMS (Misterguru) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
