Files (4)

cap_jk_steel_rims_no_logo.step

STEP

126.6 KB

cap_jk_steel_rims_no_logo.stl

STL

920.3 KB

Jeep_cap_jk_steel_rims.step

STEP

279.7 KB

Jeep_cap_jk_steel_rims.stl

STL

1.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
cap_jk_steel_rims_no_logo.step	Cover / cap	126.6 KB STEP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
cap_jk_steel_rims_no_logo.stl	Cover / cap	920.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Jeep_cap_jk_steel_rims.step	Cover / cap	279.7 KB STEP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Jeep_cap_jk_steel_rims.stl	Cover / cap	1.1 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Jeep JK steel rims center cap

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This fits the winter/ off road rims for Jeep Wrangler JKs. The inner hole is approximately 65 mm and the outer cap is significantly wider at about 84 mm with an inner lip to allow for a push counter force to hold it in place. I don't know if it will fit any other vehicles, I only know it will fit mine. Feel free to modify and redistribute. Printed in any direction worked well with PETG and ABS though if your ABS prints are somewhat brittle printing it face forward instead of down may help so that the tabs don't break. I printed with no supports with the outer face down with no issues. Have tested in many conditions and finally highway speeds so far all have stayed in.

Compatible Cars

Jeep Wrangler

Published Jun 29, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Jorge Castano (joeanca) · License: CC0

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.