Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Midland MXTA25 "Ghost" Antenna Mount - Jeep Wrangler JL 2018+ (2-door)

0 downloads33 views0 likes

Shared by

Verified

Description

I needed a place to mount the my Midland MXTA25 "Ghost" antenna that didn't require $80, screwing into the metal of the Jeep, or ominous mount descriptions from the mounds of sketchy mounts. This is for 2-door JLs only as the bolt holes used are located on the inside of the sport bar/roll bar of the 4-doors. ~~ Parts List ~~ * Midland MicroMobile MXTA25 - https://midlandusa.com/product/micromobile-mxta25-3db-gain-ghost-antenna/ * Midland MicroMobile MXTA25 Low Profile Antenna Cable - https://midlandusa.com/product/micromobile-mxta24-low-profile-antenna-cable/ * Flanged M8-1.25 x 30mm - https://www.dormanproducts.com/p-101304-980-430d.aspx?origin=keyword Note: The mounting location is shared with soft top hardware.