Star Wars Imperial Cog Blinker and Fog Light Grilles for Jeep Wrangler - image

Files (2)

Jeep_JK_Foglight_Grille.stl

STL

1.5 MB

Jeep_JK_Turn_Signal_Grille.stl

STL

1.5 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Jeep_JK_Foglight_Grille.stl	Printable file	1.5 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Jeep_JK_Turn_Signal_Grille.stl	Printable file	1.5 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Star Wars Imperial Cog Blinker and Fog Light Grilles for Jeep Wrangler

1 downloads203 views0 likes

Shared by

Michael Chen

Verified

Description

I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. I took the basic size from Summer Ride's Flasher Grille. I replaced the grille with the Imperial cog symbol and played with the flanges a bit. It is open enough that you can still see most of the light from the blinker (see picture). The fog light grill needed tweaking with the size. I also rotated the flanges 180 degrees. Now they fit perfectly. I tried black and thought it would look great with the white Jeep body. However, as can be seen in the pictures, the black didn't stand out like I thought. The white does show better, but that's my opinion. Also, my foglight have halo lights. The halos show perfectly just inside the outside ring of the grille. It looks great actually (picture). The differences between the blinker and fog light files are: The fog light file has a slightly smaller diameter, like 1.5 mm or so.