Files (3)

wheel.stl

STL

224.0 KB

complete.stl

STL

6.5 MB

body.stl

STL

15.5 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
wheel.stl	Printable file	224.0 KB STL	4g $0.10	5g $0.11	10g $0.24	Ensure proper bed adhesion to prevent warping
complete.stl	Printable file	6.5 MB STL	17g $0.40	18g $0.44	40g $0.96	Ensure proper bed adhesion to prevent warping
body.stl	Printable file	15.5 MB STL	25g $0.60	27g $0.65	60g $1.44	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Jeep Grand Cherokee SRT8

0 downloads164 views0 likes

Shared by

Michael Chen

Verified

Description

Model of a Jeep Grand Cherokee SRT8. It has no special scale and should be printable. If anything is wrong with the files, contact me. +++For more car models check out my CAR GALLERY. +++Frequently asked questions are to me HERE. +++Do you need some spare parts like mirrors, spoilers etc.?