Jeep Gladiator Pre-Runner Grill LED Mounts - image

Files (1)

PrintNewJeep_Gladiator_grill_light_mount_Copy_Copy_new.stl

STL

283.5 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
PrintNewJeep_Gladiator_grill_light_mount_Copy_Copy_new.stl	Mount / bracket	283.5 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure correct scaling (2540%) in the slicer for accurate print size

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Jeep Gladiator Pre-Runner Grill LED Mounts

0 downloads192 views0 likes

Shared by

Michael Chen

Verified

Description

Inspired from TCMP's JL design I created a similar one for the Jeep Gladiator as the grill is slightly different. This one will conform to the shape fo the frill slightly and will work with all round 3/4" marker lights. Here is the link to Amazon for the LEDs that I used (https://www.amazon.com/gp/product/B07DL9MKHR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1). You can print 3 and put one in the center like TCMP did or you can print 4 like I did as I wanted to avoid the forward facing camera that I have as an option on mine. Important note: Please scale up 2540% in your slicer if it is not showing the correct size. I originally designed this in inches and most slicers recognize everything in mm by default.