Files (1)

jeep_switch_pannel.stl

STL

2.6 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

46g

Based on 25% main infill across listed model files

Material cost

$1.10

Filament only at roughly $24/kg PETG / ASA

Print time

1.3h–2.2h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
jeep_switch_pannel.stl	Primary model	2.6 MB STL	42g $1.01	46g $1.10	101g $2.42	Check the Thingiverse page for creator-recommended print settings.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

jeep switch pannel

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

for switches on a jeep. Catalog note: jeep switch pannel is a 3D-printable car-part listing indexed for classified fitment Jeep. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.