Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep WJ Grand Cherokee Front Bumper Retainer Clip 6505361AA
Shared by
3DPrintedCarPartDescription
This is a front bumper retainer for my 2000 WJ Jeep Grand Cherokee Limited. I'm assuming it is the same for all 1999 - 2004 WJ Jeep Grand Cherokees, and you can't really mistake this for any other body fastener I have seen. It is fully functional when printed in any tuff filament with resistance to road/petrol solvents like gasoline, diesel, tar, oil, etc. The insert is intended to be printed at the angle I modeled it with for layer strength. There is no better way to say this next part without making it obvious I tried to avoid it, so keep your mind out of the gutter It will fit tight at first, so pop the tab in and out a few times to loosen the slot before installing the retainer in it's hole.
Compatible Cars
Originally published on thingiverse.com by John Underwood (ironjohnhenry) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
