Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| front_cup_holder_coaster.stl | Mount / bracket | 455.6 KB STL | 24g $0.58 | 26g $0.63 | 57g $1.38 | Ensure the model is oriented to minimize supports |
| rear_70mmx2.stl | Printable file | 351.3 KB STL | 22g $0.53 | 24g $0.57 | 52g $1.25 | Ensure the model is oriented to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Wrangler JK Star Wars Imperial Cog Cup Holder Coasters
Shared by
Michael ChenDescription
I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. There are three sizes because the two cup holders in the front of my 2015 Jeep Wrangler are different sizes. The front one is slightly bigger than the one behind it. The two in the back seat are a different size altogether. If you want the two colors, change the filament at 2.7 mm, which is also about 40%.You want to make sure that it has started the walls and infill of the elevated parts. I don't know which other Jeep models have these same sizes (front 78mm and 74mm, rear 70mm), but you can just scale them to fit. If you do, the 2.7mm to change the filament will change too.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
