KTM Trailer Tow Hitch Cover V2 Ready to Race - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 40% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

KTM Trailer Tow Hitch Cover V2 Ready to Race

0 downloads26 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

V2 of KTM Tow Hitch Cap with the Ready to Race logo =PRINT AT 110% SCALE= If you don't have an opportunity to measure your tow hitch and adjust the inner diameter of the print Print Settings on the Prusa Mini: - 0.25mm draft settings - top layer ironing - 2 or 3 perimeters for strength - No infill - No supports This is a remake of https://www.thingiverse.com/thing:5008327