Land rover defender 90,110,130 Switch Panel - 3 Switches - image

Files (3)

landrover_switch_plate-1peice.stl

STL

70.6 KB

landrover_switch_plate.stl

STL

59.6 KB

landrover_switch_plate_endcap.stl

STL

21.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
landrover_switch_plate-1peice.stl	Printable file	70.6 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
landrover_switch_plate.stl	Printable file	59.6 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
landrover_switch_plate_endcap.stl	Cover / cap	21.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Land Rover defender 90,110,130 Switch Panel - 3 Switches

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Dashboard bezel for the Land Rover defender to replace the panel to the right of the steering wheel that holds 3 switches. It is made in 2 parts purely because it is just too big to print on my Printrbot Simple in 1 part. Also includes a 1peice file which contains the original panel in 1 piece.