New Land Rover Defender Dashboard Console - image

Files (6)

New_Defender_Beacon_Console_LHD_Blank.stl

STL

26.8 KB

New_Defender_Beacon_Console_LHD_Buttons.stl

STL

146.3 KB

New_Defender_Beacon_Console_RHD_Blank.stl

STL

26.8 KB

New_Defender_Beacon_Console_RHD_Buttons.stl

STL

146.5 KB

New_Defender_cover_LHD.stl

STL

45.7 KB

New_Defender_cover_RHD.stl

STL

40.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
New_Defender_Beacon_Console_LHD_Blank.stl	Printable file	26.8 KB STL	Slice file	Slice file	Slice file	Ensure a secure and level print bed for optimal adhesion
New_Defender_Beacon_Console_LHD_Buttons.stl	Printable file	146.3 KB STL	Slice file	Slice file	Slice file	Ensure a secure and level print bed for optimal adhesion
New_Defender_Beacon_Console_RHD_Blank.stl	Printable file	26.8 KB STL	Slice file	Slice file	Slice file	Ensure a secure and level print bed for optimal adhesion
New_Defender_Beacon_Console_RHD_Buttons.stl	Printable file	146.5 KB STL	Slice file	Slice file	Slice file	Ensure a secure and level print bed for optimal adhesion
New_Defender_cover_LHD.stl	Cover / cap	45.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ABS; check sealing faces and verify in slicer.
New_Defender_cover_RHD.stl	Cover / cap	40.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ABS; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

New Land Rover Defender Dashboard Console

0 downloads200 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a console for mounting custom Button (or other items) to the small drivers side recess on a New Land Rover Defender. I made this for the switches needed for my recovery lighting. This leaves a nice recess behind for cables and fuses. There are four options available one blank where you can modify as you please to fit watever purpose you need it for and one which includes all the holes I prepared for switches without the text. Again make changes as you see fit. Both are also available in both Left and Right Hand Drive. I suggest printing in either ABS or PETG as PLA could get soft in the sun. I have used Zip ties to secure as I did not want to drill into dashboard as this would be permenant as could make it awkward to repair and sell leter. (it is very secure).