Land Rover Defender RHD Seat Box Floor Vent - image

Files (1)

Land_Rover_Defender_Seat_Box_Floor_Vent_2.stl

STL

243.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Land_Rover_Defender_Seat_Box_Floor_Vent_2.stl	Primary model	243.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Land Rover Defender RHD Seat Box Floor Vent

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a Land Rover Defender Seat Box Floor Vent, which allows air intake from below the vehicle, for a Seat Box fitted Diesel Night Heater., There is a rubber grommet that you can remove and replace with this vent pipe, I used marine sealant to hold it in place.