Files (1)

demister_LR.stl

STL

40.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
demister_LR.stl	Primary model	40.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal airflow

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Simpel Demister Land Rover

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I drive a year 2000 Land Rover Defender and it is a short coming of the air vent,that it dont blow air over the side window. So i made this simpel diffuser to simply click in to the air vent And now i get some of the air over the side window and i can see my mirror in the wet. I have only used this a couple of days but i seem to work well enough,will update when i have driven some more. You have to place it over the funnel in the air vent to get the best results(around 150mm from the outside of the vent) It works on all Defenders with the old type of dashboard < 2001 as far as i know. Happy off roading.