Mazda Cup Holder Insert / Coaster - image

Files (1)

Mazda_Coaster.stl

STL

595.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Mazda_Coaster.stl	Primary model	595.4 KB STL	Slice file	Slice file	Slice file	Scale the model to 101% in your slicer for a tighter fit if needed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Mazda Cup Holder Insert / Coaster

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this insert to fit in the cup holders of my 2014 Mazda3 sedan. It should also fit other Mazda vehicles from 2014-2017 (and possibly other vehicles). The insert measures 72mm in diameter. At this size, there is some slight "wiggle room" to allow for easy removal of the insert. If you want a tighter, more permanent fit, simply scale the model to 101% in your slicer. Feel free to try other sizes, although I have not tested them myself. Let me know if you make this and it fits in your cup holder! If you have the ability to measure the inner diameter of your car's cup holder, you can scale the model in your slicer to fit your needs. I used digital calipers to measure the inner, very bottom surface of my cup holders. If you'd be interested in other makes/models, or simply a blank version, let me know in the comments! I will do my best to accommodate!