Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| mazda_cx5_sunroof_switch.stl | Primary model | 194.2 KB STL | Slice file | Slice file | Slice file | Print with the large flat surface facing downwards to minimize supports. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mazda CX5 sunroof switch replacement slider
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ABS
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for durability
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
The sunroof control switch for the Mazda CX5 connects to a slider that is known to break when the car gets old. This model is an effective replacement for that slider. Mazda only sells replacement for the entire roof console, so this model could save you over a hundred bucks. Ideally, print this in any filament that's more heat tolerant than PLA, such as ABS (which I think the original part is printed in) or PETG or even PC. For best results, print upside down, with supports only on the large flat surface and the short riser with a hole in it. The rest can be handled by bridges. See the included 3mf if unsure.
Compatible Cars
Originally published on printables.com by tabicat · License: Public Domain
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Mazda CX5 Center Cap 57mm - Blank
Mazda CX-5
2016 Mazda CX-5 Wireless Phone Charger + Android Auto
Mazda CX-5
Mazda Cx-5 Key Fob
Mazda CX-5
Universal head unit holder for Yaesu FT-857
Mazda CX-5
Mazda CX5 Phone Magnetic Mount platform
Mazda CX-5
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
