Mazda trunk shade spring holder repair kit - image

Files (2)

Mazda_TrunkShadeCoverHolder.stl

STL

176.5 KB

Mazda_TrunkShadeCoverHolder_Meshmixer_support.stl

STL

8.4 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
Mazda_TrunkShadeCoverHolder.stl	Cover / cap	176.5 KB STL	Slice file	Slice file	Slice file	Use ASA / ABS; check sealing faces and verify in slicer.
Mazda_TrunkShadeCoverHolder_Meshmixer_support.stl	Cover / cap	8.4 MB STL	Slice file	Slice file	Slice file	Use ASA / ABS; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Mazda trunk shade spring holder repair kit

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This thing is used to repair the broken spring holder for Mazda 6 GY trunk shade cover. I found that the best strength comes when printed horizontally. I have uploaded two models, one with supports generated with meshmixer and one without so you can feel free to modify it or generate your own supports. Meshmixer supports are easy to remove with pilers. Printed on Ultimaker 2 with ABS filament.