Files (2)

Exh_Cam_Tool.stl

STL

135.6 KB

Intake_VVT_Cam_Tool.stl

STL

210.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
Exh_Cam_Tool.stl	Printable file	135.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal print quality
Intake_VVT_Cam_Tool.stl	Printable file	210.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Miata Cam Seal Installers

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

####What is it? These are tools to ease installation of new camshaft seals on Miata engines. ####How do I use it? Print the part sturdily; I use around 30-40% infill with PLA. Read the service manual for your car (you have one, right?) and follow the instructions to prepare the seal and bore. Place the tool against the seal, install the bolt, and slowly tighten to push the seal evenly into the bore. Keep a close eye on the seal as it needs to go in straight. Due to printing tolerances, the driver can tilt while in use, so keep an eye all around the seal as you drive it. It can be used with gentle taps of a hammer as well to straighten things out if they become crooked. Warning! This tool won't stop at the proper distance, it's up to you to make sure you only push the seal in until it's flush! Read the service manual! ####What's it for? These tools should work on all 1.6L and 1.8L BP engines. The shorter cam seal driver is for Exhaust cams on all ('90-'05) Miatae and Intake cams on non-VVT ('90-'00) models. The longer VVT seal driver is for installing the VVT intake cam seal on applicable ('01-'05) models. These installers will probably also work on other engines using the BP, like certain Ford Escorts and 1st gen Kia Sephias. Possibly other clones of the BP like the Kia T8D in 2nd gen Sephia/Spectras ####Anything else? Basically, needed these tools since I'm rebuilding my NB2 engine and instead of buying some and waiting forever for them to arrive, decided to just make them using measurements from my engine and seals. I hope someone else finds them useful! ####Files: STL: obvious F3D: Fusion 360 source files, if you want to modify them.