Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mopar Headlight Cap Wrench
Shared by
3DPrintedCarPartDescription
Made this to help loosen off a 2011-2014 Dodge Charger low-beam headlight cap Could be the same for other mopars also. Simple design allows you to get it cracked from the o-ring stick. I would recommend an elastic band through the hole and around your wrist to keep from dropping it. Pictured is the cap its designed for!
Compatible Cars
Originally published on thingiverse.com by Doug Calvert (13DjjC13) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
