Files (2)

Border_Bumper_v2.stl

STL

66.3 MB

Original_Scan_Border_Style_Front_Bumper.stl

STL

63.3 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Border_Bumper_v2.stl	Printable file	66.3 MB STL	23g $0.55	25g $0.60	55g $1.32	Ensure proper bed adhesion due to the part's size and complexity
Original_Scan_Border_Style_Front_Bumper.stl	Printable file	63.3 MB STL	23g $0.55	25g $0.60	55g $1.32	Ensure proper bed adhesion due to the part's size and complexity

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

MR2 SW20 Border Bumper (RAW)

0 downloads246 views0 likes

Shared by

Michael Chen

Verified

Description

Scanned with a Miraco Revopoint (FAR settings) Reverse Engineering Required PRIOR to using Educational Purpose / Template for custom addon creation Donations are accepted. Will allow me to purchase upgrades for 3D scanning and MR2 parts that i can scan and share for Educational Purposes 8/27/2025 - Uploaded ORIGINAL SCAN OF FRONT BUMPER. Meaning, true size to bumper.