MX5 Miata - False crank print in place (After power window conversion) for MK2 (NB) - image

Files (2)

crank.stl

STL

38.4 KB

CrankRetainer.stl

STL

230.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
crank.stl	Printable file	38.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
CrankRetainer.stl	Printable file	230.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

MX5 Miata - False crank print in place (After power window conversion) for MK2 (NB)

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I converted my car to power windows but thought it would be funny if the window cranks were still turn-able in the doors instead of just a blank cover.