Files (2)

base_only.stl

STL

12.3 KB

dashpod.stl

STL

54.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
base_only.stl	Accessory piece	12.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
dashpod.stl	Printable file	54.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

NC miata dash single gauge pod

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This will replace the center speaker grill on a 2006-2015 NC Miata to fit a standard 52mm gauge. included blank grill replacement for misc. use (phone/camera/gps mounts, etc) Note, I made some slight tweaks but have not reprinted. Mostly enlarged the hole so less sanding is required to fit a gauge.