Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Defender Consule tray v4.stl | Primary model | 69.0 KB STL | Slice file | Slice file | Slice file | Scale down 1% if the fit is too tight |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
New Land Rover Defender center console tray for (no fridge)
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA for durability and heat resistance
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for a balance between strength and weight
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a small tray to fit in the top of the center console of a 2020 or newer Land Rover Defender (without the fridge option) to provide easy access storage. It is a tight fit needs sanding around the top lip and deburring to make it fit. Or try scaling it down 1% and see how it fits.
Compatible Cars
Originally published on printables.com by Adventure Mike · License: Public Domain
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
New Land Rover Defender Dashboard Console
Landrover Defender Puma 2.2 / 2.4 Garmin SatNav Mount - Land Rover
New Land Rover Defender Dashboard Console
Land Rover Defender 110 Dashcam mount for 2016 Elinz FHD Camera
Console for dashboard switches Land Rover Defender
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
