Phone Holder for Blaupunkt Stereos - image

Files (6)

holder_a1.1.STL

STL

48.6 KB

holder_b1.1.STL

STL

244.8 KB

holder_c1.1.STL

STL

937.0 KB

holder_d1.STL

STL

16.3 KB

holder_e1.1.stl

STL

46.8 KB

holder_f1.1.STL

STL

11.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
holder_a1.1.STL	Mount / bracket	48.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
holder_b1.1.STL	Mount / bracket	244.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
holder_c1.1.STL	Mount / bracket	937.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
holder_d1.STL	Mount / bracket	16.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
holder_e1.1.stl	Mount / bracket	46.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
holder_f1.1.STL	Mount / bracket	11.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone Holder for Blaupunkt Stereos

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a remix of the Adjustable car phone holder by renars. As his vent clamp didn't work for for the round vents of a fiat, I changed it to hold on to the two holes of the car's blaupunkt stereo. I printet the phone holder in PLA with a 0.2 layer height for every part except for the screw. For the screw I used a 0.1 layer height. Please share your experience! Further help: Depending on how your slicer imports the.stl, you might need to rotate the part.