Pontiac Door Latch Connector Slide - image

Files (1)

Connector_Slide.stl

STL

93.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Connector_Slide.stl	Primary model	93.0 KB STL	Slice file	Slice file	Slice file	Print with the flat side down to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Pontiac Door Latch Connector Slide

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Replacement slide latch or clasp for the door latch electrical connector. Pontiac G6. Prints flat and folds into shape. I designed this as close as possible to the original, with one (other) exception - the original has a flat edge inside the slide tracks to catch a finger to help keep the slide in the locked position. It's not really necessary as there are other keepers to help with that, and it severely reduces the strength of the piece. It works fine without it, and it's much stronger. This is for a 10-pin connector, will probably fit many other slide-clasp connectors.