Remix of Housing for Honda Civic key handle for 3 button remote - image

Files (2)

Housing_for_Honda_Civic_key_Bottom_w_remote2.stl

STL

198.7 KB

Housing_for_Honda_Civic_key_Top_w_remote.stl

STL

604.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
Housing_for_Honda_Civic_key_Bottom_w_remote2.stl	Printable file	198.7 KB STL	Slice file	Slice file	Slice file	Ensure proper fit and clearance around the key metal to avoid sticking
Housing_for_Honda_Civic_key_Top_w_remote.stl	Printable file	604.0 KB STL	Slice file	Slice file	Slice file	Ensure proper fit and clearance around the key metal to avoid sticking

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Remix of Housing for Honda Civic key handle for 3 button remote

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a remix of the Housing for Honda Civic key/remote by WL Production. The original one is a good design already, though I did add 2 changes. 1. The place the key metal went in would get loose and wobbly after some use. I added material there for more strength. 2. I made the top thicker to make the Panic button less easy to accidently push in. This even occurs with the manufacturer's key as well. The neighbors didn't appreciate the the alarm being triggered as I walked with the keys in my pocket. I have used many times and still works well. Please be sure to test the fit in your ignition before driving somewhere. My first remix attempt added too much material and the key was tight and hard to get out. The one posted here has less added material added at key metal and has worked without sticking. This hey housing was printed at.2mm layer height and 90% infill.