Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Holder.STL | Mount / bracket | 21.5 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Hook.STL | Printable file | 557.2 KB STL | Slice file | Slice file | Slice file | Use a temperature-resistant material due to the car's interior environment. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Zoe R90 2017 Cable Hook
Shared by
3DPrintedCarPartDescription
I liked the original design very much, but the hook was to small and so the upper side of the holder did not get in contact with the bore of the wall of my Zoe R90 2017. So all the weight of the cable lays on the lip of the wall of the Zoe, which has been bended over time. That’s why I decided to redesign the hook to have a more secure connection to the wall of the Zoe. For the Assembly you will need a M3X20 Conehead screw an a M3 nut. After printing, the M3 nut is assembled in the holder. Then the holder have to be assembled on the lip of the wall of the car. After that, the hook have to be assembled in the hole and the screw have to inserted an fastened. Please use a temperature resistant material for the print. PETG school do the job, but it would be better to have a material like Extrudr GrennTec Pro.
Compatible Cars
Originally published on thingiverse.com by Frank Lauer (SignalSpirit) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
