Scosche MagicMount adapter for 3rd gen Toyota Tacoma - image

Files (1)

scosche_mount.stl

STL

1.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
scosche_mount.stl	Mount / bracket	1.2 MB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Scosche MagicMount adapter for 3rd gen Toyota Tacoma

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Designed to work with the magnetic MagicMount by Scosche. I made this because the adhesive that came with the original mount eventually failed. The Scosche mount works with the air vent, but my hand would block my phone screen when it was mounted on the vent, meaning I had to move my hand or lean over to view the navigation on my screen. So I needed to figure out a better way to mount my phone. This fits nicely on top of the trim surrounding the infotainment area.