Smooth self tapping bag hook for Tesla Model 3 trunk - image

Files (1)

model_3_self_tapping_hook_v1.stl

STL

3.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
model_3_self_tapping_hook_v1.stl	Primary model	3.3 MB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for proper adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Smooth self tapping bag hook for Tesla Model 3 trunk

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This grocery / bag hook combines 2 other designs for the best of both worlds. It uses the nice smooth and easy printing hooks from Peterkrull and the excellent self tapping system of Motorpixiegimbals. Simply print and screw on to the threaded bolt in the trunk of the Model 3. No tools needed and no modifications needed to car.