Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Speaker Adapter for SMART FORFOUR (454) 2004 - 2006
Shared by
3DPrintedCarPartDescription
This is my first 3D Project (never really used any pro 3D tool before, so if you see any mistake let me know so I can fix it). This is the speaker adapter for the Smart Forfour (454) 2004-2006 in order to install another 13cm/~5.10" speakers. Importantes notes: - This model doesn't provide the holes for the original speaker protector, simply because most of the speakers in the market won't fit and thus the support can't be installed, and also because otherwise it wouldn't align with the screws. But if you want to try it out I've left the modifier on the.blend file in order to make them appear again. - You should use the speaker cover shield that comes with the new speaker - The original screws don't work because of height of this piece, I would recommend using the screws from the new speaker for the adapter itself, and find similar screws (a little bit shorter and larger) for the speaker. - I've kept a place for the metal screw pieces that usually come with the new speaker.
Compatible Cars
Originally published on thingiverse.com by Luis Da Costa (aliasbody) · License: All Rights Reserved
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
