Speed Tech Lights Z4 Light Mount for Crown Victoria - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 18%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Speed Tech Lights Z4 Light Mount for Crown Victoria

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is just a bracket (or mount) for a Speed Tech Lights Z4 surface mount light. It's designed to mount on the rear passenger door panels and shine out of the small window of the Ford Crown Victoria. The two holes up top are sized to fit #6-32 tapered heat-set inserts but you can also just use machine screws with nuts on the back. I've made them out of standard polycarbonate (PC), NylonX, and now Carbon Fiber PC. The best results that I've experienced has been the following: Wall thickness: 4 shells Layer height: 0.2 mm Infill: 15% Infill Pattern: Gyroid.