Files (2)

Sprinter_Switch_Blank-TR4_x_4.stl

STL

184.9 KB

sprinter_switch_blank.stl

STL

1.5 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Sprinter_Switch_Blank-TR4_x_4.stl	Printable file	184.9 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
sprinter_switch_blank.stl	Printable file	1.5 MB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Sprinter Switch Blank

0 downloads137 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

After making so many versions that didn't quite fit, I found mcjohnny24 who worked perfect! I found the sides to be a little weak and added in supports from my earlier version to come up with this one. Thank you mcjohnny24! This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9HCQlNWNdCN