Crafter / Sprinter - Double-Seat to Single-Seat - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Crafter / Sprinter - Double-Seat to Single-Seat

0 downloads54 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

After I replaced the double-seat in my Crafter into a single-seat, there were this big missing parts in the floor. After I have seen the prices about the single-seat floor parts I decided to fix this by my own. First I've build a box which fitted into the hole where the second-seat was before. For this step you'll find a DXF-File for the back panel of the box - from this you can build your own. You have too cut the floor behind the handbrake to fit (see the pictures). After the box was finished, I've created a floor-piece to close the gap between the original floor and the seats. For this you'll find a second DXF-File here. The files are made for a 2016 VW Crafter (2E), but should fit for Sprinter W906 too.