Files (1)

subaru_backup_cam_cover.stl

STL

11.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

Based on 25% main infill across listed model files

Material cost

$0.22

Filament only at roughly $24/kg PETG / ASA

Print time

15m–26m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
subaru_backup_cam_cover.stl	Cover / cap	11.0 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Subaru Backup Cam Cover 1.0

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

*Update: Check field of view shot, I made some newer designs (2.0 and 3.0) Feel free to try them out and let share your results. I'll print out my own soon* For 2018 Subaru Outback, may fit other models. The physical fitment is actually pretty good. I need to test the view of the camera. I may have to make some slight modifications. Any gaps can be filled by 3M automotive double-sided tape. This thing was made with Tinkercad.